Parte 2 di 2 - Serie Computer Circolare Jeppesen Part 2 of 2 - Jeppesen Circular Computer Series
Il Computer Circolare Jeppesen (CR) - Lato Vento The Jeppesen Circular Computer (CR) - Wind Side
L'altra faccia del CR risolve il triangolo del vento: dato vento e rotta vera, trova l'angolo di correzione (WCA), la prua vera e la velocità al suolo (GS). Ruota l'anello azimutale e osserva il puntino del vento spostarsi sulla griglia fissa. The other face of the CR solves the wind triangle: given the wind and true course, find the wind correction angle (WCA), true heading and ground speed (GS). Rotate the azimuth ring and watch the wind dot move on the fixed grid.
← Parte 1: Lato Calcolo (velocità, tempo, distanza) ← Part 1: Calculator Side (speed, time, distance) Esercitati senza CR: Primo Problema del Vento → Practice without the CR: First Wind Problem →
Anatomia del Lato Vento Anatomy of the Wind Side
Un anello azimutale (0-360°) ruota liberamente sotto una griglia fissa: la griglia ha un centro ("grommet"), archi di velocità e linee di deriva che si irradiano verso il basso. L'indice vero, in alto, indica il valore attualmente impostato sull'anello. An azimuth ring (0-360°) rotates freely under a fixed grid: the grid has a center ("grommet"), speed arcs, and drift lines fanning downward. The true index at the top shows the value currently dialed on the ring.
Ruota l'anello finché la direzione di provenienza del vento è all'indice vero (in alto). Rotate the ring until the wind's "from" direction is at the true index (top).
Segna un punto verso l'alto dal grommet, a distanza pari all'intensità del vento (scala archi). Mark a point straight up from the grommet, at a distance equal to the wind speed (arc scale).
Ruota l'anello (il puntino resta solidale all'anello) finché la rotta vera è all'indice: leggi WCA e GS. Rotate the ring (the dot stays fixed to the ring) until the true course is at the index: read WCA and GS.
Simulatore - Lato Vento Simulator - Wind Side
Inserisci vento, rotta e TAS. Usa i pulsanti guidati oppure trascina l'anello liberamente per esplorare. Enter wind, course and TAS. Use the guided buttons, or drag the ring freely to explore.
Trascina l'anello. Il puntino ciano è il vento; il cerchio verde tratteggiato mostra dove la griglia scorrevole porterebbe il grommet per leggere il GS. Drag the ring. The cyan dot is the wind; the dashed green circle shows where the sliding grid would bring the grommet to read GS.
▸ Formula▸ Formula
rel = WD − TC
WCA = asin( (WS / TAS) × sin(rel) )
HDG = TC + WCA
GS = TAS × cos(WCA) − WS × cos(rel)
Esempi Guidati Worked Examples
1. Vento 300°/25kt, TC 045°, TAS 120kt → vento quasi al traverso da sinistra: WCA ≈ +10°, HDG ≈ 055°, GS ≈ 102kt. 1. Wind 300°/25kt, TC 045°, TAS 120kt → wind roughly on the left beam: WCA ≈ +10°, HDG ≈ 055°, GS ≈ 102kt.
2. Vento in coda diretto (WD = TC + 180°) → WCA = 0°, GS = TAS + velocità del vento. 2. Direct tailwind (WD = TC + 180°) → WCA = 0°, GS = TAS + wind speed.
Quiz Quiz
5 domande casuali - calcola WCA, prua o GS dati vento, rotta e TAS. 5 random questions - compute WCA, heading or GS given wind, course and TAS.